NAD+ Pen® Step-by-Step Guide
1. Prepare the Pen and Cartridge
- Remove the Hōlte NAD+ Pen® and an NAD+ cartridge from their packaging.
- Allow the NAD+ cartridge to rest at room temperature for 5–10 minutes.
2. Unscrew the Cartridge Holder
- Take the lid off the pen to expose the clear cartridge holder.
- Unscrew the clear cartridge holder from the base of the pen.
- If the plunger is exposed, press it into the base of the pen with your finger.
3. Insert the NAD+ Cartridge
- Take the NAD+ cartridge and insert it into the clear cartridge holder with the silver tip going in first.
- Screw the clear cartridge holder (with the NAD+ cartridge inside) back onto the base of the pen firmly.
4. Prime the Pen
- Twist the base of the pen until the dose meter is fully extended.
- Push the dose meter back in and watch the plunger move up inside the cartridge holder.
- Repeat this process until the plunger touches the bung at the bottom of the cartridge and you feel resistance.
- Your pen is now prepped and ready for daily use. Continue with the steps below.